Description
For all types of filter.
For any volume of water.
Where: Directly into the pool.
When: If necessary.
Dosage: 180 g for 10 m³ to increase the TAC +10 mg/l
Use this product only in accordance with the instructions on the packaging.
- Check the TAC at least once a year. The ideal alkalinity should be between 80 and 120 mg/L (8 and 12°f). This value improves flocculation and avoids sharp variations in pH.
- With filtration running, add Alca-Plus® directly to the pool water.
- Let the filtration run for 2 to 3 hours, check the TAC and readjust it if necessary.
- If there is a control system, it is essential to maintain a TAC close to 150 mg/L (15°f) and to stop the pH control when adding Alca-Plus®.
Recommendations: Filtration must run every day (for at least as long as the water temperature divided by 2). The treatment should preferably be carried out in the evening after swimming. Use of Alca-Plus® may require acid pH correction afterwards with Bayrol pH Plus Granules or Bayrol pH Minus. To avoid turbidity, do not add more than 500g per 10m³.
Warning: Never mix different chemicals in concentrated form. Always add the product to the water and never the other way round.
You can read more about Bayrol Alca-plus granules here.
