Description
High-quality chlorine granules for shock treatment in case of water problems. Quickly and effectively increases the active chlorine content. Less dust due to the special granular form.
-
For all filter types
-
For all pool sizes
-
Where: directly into the water
-
When: in case of water problems
-
Dosage: 200g per 10m³
- Use biocidal products with care. Always read label and product information before use.This product is to be used exclusively for the specified purpose in accordance with this description.
- Before adding, check the pH with BAYROL pool tester or test strips and, if necessary, adjust it to the ideal range of 7.0 to 7.4.
- In case of water problems, add 200g of Chlorifix® per 10m³ directly to the water with the circulation pump running.
- The addition should preferably be done in the evening after bathing. Let the circulation pump run for 12 hours.
- Do not bathe again until the chlorine level has dropped below 3mg/L.
- For a basic chlorination, dose 50g per 10m³.
Tip: To prevent algae growth, we recommend the regular addition of Desalgine® Jet. In the event of lots of bathers, storms and high temperatures, it is required to increase or double the amount of tablets.
Important Notes: Be sure to avoid direct contact with materials that are not resistant to chlorine. To reliably avoid bleach spots in foil or painted pools, add Chlorifix® via the skimmer or dissolve it with water in plastic buckets beforehand. First add water, then Chlorifix®.
