Bayrol Calcinex – Scale & Metal Sequestrant

Description

For all filter types
For all pool sizes
Where: directly into the pool water
When: as needed, immediately after filling the pool
Dosage: 300ml per 10m³

Always read label and product information before use.

This product is to be used exclusively for the specified purpose in accordance with this description.

• Add 300ml of Calcinex^® per 10m³ immediately after filling the pool with the circulating pump running.
• After dosing, let the circulation pump run for at least two hours to allow the product to spread out well in the pool.
• For water temperatures above 28°C, it is recommended to increase the dosage by 50%.
• If fresh water is added after backwashing, re-dosing is required.

Tip: The pool water must be circulated continuously.  To calculate the circulation time, the following rule of thumb applies: water temperature: 2 = circulation time per day.

Important notes: Calcinex® acts preventively against water discolouration by metals.  Metals or discolouration that has already precipitated cannot be removed.  Never mix chemicals with other chemicals, neither in solid form nor in concentrated solution!  When preparing solutions, always dose product into water, not vice versa.

You can read more about Bayrol Calcinex here.