Solution 2 (pH Test)

How it works...

How to use:

1. Fill large tube/vial (with water to be tested) to the solid line.
2. Add 1 drop of solution #4 (Chlorine Neutralizer) – Add 2 drops if Chlorine level is above 1.5 ppm/Bromine above 3.5 ppm.
3. Add 5 drops of solution #2 (pH Test) and mix by swirling. Compare test results to pH colour standards chart.
4. If reading is above 7.8 ppm, perform Acid Demand Test (Solution #3) using the same water sample. Adjust the total alkalinity if required, before adjusting the pH.